Our hardwood floors are more delicate than we think despite their hard name. The deep scratches caused to them by the furniture that we daily slip; can make the whole floor virtually unusable.
It is true that we can continue walking on them without problems; but the true problem is aesthetically, they will become almost a cancer for our eyes.
Repairing them is simpler than you think, as long as you do it right; so here at Decorating Visita Casas, we will tell you the techniques to follow, and great advice to avoid these scratches.
Hardwood floors apart from being reliable and durable, gives any home a classic touch. Its elegance and exclusiveness cannot be achieved with any other type of flooring. Hardwood floors are versatile and can be laid in almost any part of a home. There are numerous varieties of hardwoods to choose from, like oak, teak, elm, walnut, maple, rosewood and many others. The durability, hardness and colour vary depending on the type of wood. The hardness of Chestnut and Douglas fir is very low when compared to the hardness of Caribbean Cherry or Brazilian Walnut. The moisture content in the wood affects its stability and durability adversely.
Hardwood flooring are classified into different grades like clear, select, common 1, common 2 and grade 1 to 3. The grading depends on the exterior look of the un-finished hardwood flooring.
Hardwood flooring provides a timeless elegance to any room when it is laid in sync with the interior décor of the room. At the moment of installing hardwood floors you can there are different methods to choose and it includes:
Glue Down method: Here parquets or wooden panels are glued to a subfloor which can be made of wood or concrete.
Nail Down method: Nails of ¾” thickness are used to bind hardwood on to a subfloor that is of the same grade or above grade than the hardwood.
Staple Down method: Here a pneumatic stapler is used to attach the hardwood on to a subfloor instead of nails. This method is the easiest of the three and is mostly used by DIY aficionados.
Floating method: This method is employed to lay hardwood on uneven surfaces. A layer of foam is placed in-between the hardwood and the subfloor.
Once the hardwood flooring is laid perfectly they are very easy to maintain. Below you can find a few tips to keep your hardwood flooring sleek and shining.
• Regular maintenance like vacuuming or sweeping is a must to remove the dust that might otherwise scratch the flooring. It is important for this process to choose a good vaccum cleaner to help you in this job.
• You can place attractive doormats or rugs near doorways to prevent transfer of sand or dirt from shoes to the flooring.
• Since wood expands and contracts with temperature, the relative humidity of a room should always be maintained at about 45%.
• You should pad the legs of the furniture to prevent scratching while moving them.
• Hardwood floors are sensitive to light. You should protect your floors from direct light, both natural and artificial to prevent discolouration of the hardwood flooring.
• You can also add some rugs in frequently used places like washbasins, workstations, etc, to protect the hardwood flooring from scratch, water or soap.
Surface finishing of hardwood flooring will give a glossy look in addition to making floors water-resistant. There is no need to wax a hardwood floor that has a surface finish. If your hardwood floor is wax-finished, then a periodic buffing will keep it sleek and shiny.
Like Winston Mart laminate flooring, Bruce Hardwood Floors supplies a vast array of products from unfinished hardwood flooring to installation and finishing supplies. Bruce Hardwood Flooring is the finest name in hardwood floors. Bruce Hardwood floor possess the natural beauty of real wood and transformed it into floors of enduring elegance. If you are a meticulous consumer who is looking for quality, value and choice in a hardwood floor, you should visit your Bruce distributor. They have a large range of beautiful hardwood floors in many colors and finishes so you will be sure to find the exact one that suits your home decor, your taste, and the kind of use and wear your floor will get. This excellence manufacturer stands by its reputation for creating a beautiful, natural looking floor for any look.
mohawk floors
The Bruce Flooring Company has open accident free hardwood floors to the public for years and they are known for products that will give your home the natural sophistication you strive for Bruce products stand out. Bruce Hardwood Floors can be utilized in just about any room in the house, but they do not recommend that it be used in the bathroom since it is subject to so much water and moisture. Natural wood does not work well when it is exposed to excess moisture, and so the long lasting attributes of Bruce wood floors would not apply in this room. The company will provide you plenty of tips on how to best care for your beautiful Mohawk hardwood floors.
Bruce Flooring also makes and sells special products for cleaning and maintaining the floors like vacuum cleaners. Be cautious when cleaning wood floor products that you do not use any abrasives which will scratch the finish and allow the wood to become damaged. Now that you have the finest Hardwood Flooring instead of laminate floors, you want to make sure you take good care of it so it will last a lifetime. The assurance to quality and innovation has helped Bruce Hardwood flooring become the most preferred brand of homebuilders, architects and homeowners. In selecting your floor, start with the room location since that will determine whether a solid or engineered wood floor is best for you. Then, browse through the incredible Bruce selection of patterns and colors. They have a website wherein you can check the products they offer. Hardwood floorings are incredibly beautiful, highly durable and extremely reasonably priced. And at all times, they’re natural and safe for the environment.
Many homeowners choose unfinished hardwood as their flooring due to many reasons. Hardwood gives any floor a natural beauty and a classic look. Wood floors are also good investments since they can add value to your homes. That is why decisions like installing hardwood floors should not be taken for granted.
What makes hardwood floors (like Mohawk floors) different from other types of flooring is the fact that it is a beautiful natural product. It is considered to be one of the oldest flooring materials, making it comfortable and very durable. Hardwoods are also very versatile, giving homeowners a lot of possibilities for accessorizing and adding inserts into the wood floor. But its performance and appearance depends mainly on how it is installed and its finishing process. Installing wood floors can actually be done by any homeowner. All you need is the right material to use and of course, your wood floors.
Hardwood floors
Materials / Tools Needed:
o Hammer.
o Finish nails.
o Measuring tape.
o Masking tape.
o Hardwood flooring glue.
o Notched trowel.
o Hardwood floor strips.
o Tapping block.
o 1/4″ lauan plywood underlayment.
o Pneumatic stapler.
o Safety glasses.
Before installing or restoring hardwood floors, it is important to take note that they should not be installed in an area below the ground since these areas increase the risk of damaging the floors due to moisture. Another important thing to remember is that hardwood floors should only be installed on solid and sturdy surfaces. If you have checked the area, then you can now proceed with the installation. Follow these steps in installing hardwood floors:
1. Mark where the joists are using a pencil, chalk or any marker. These joists are the beams which serve as the supporter of the floor.
2. Hardwood has the tendency to expand during warm weather and contract in cold weather so it is better to stop the flooring at this point to give ample time to the change in the wood. Start measuring 3/8 inch from the baseboard and draw a line on it.
3. Looking at your starting point, find the longest wall that is straight as the starting point. Place one end of the board to the baseboard line. See to it that the hardwood plank is perpendicular to the joist of the floor. This will serve as the supporter of the flooring.
4. Using a hammer, nail one end of the board into the sub floor and the joist since a pneumatic stapler cannot reach this area anymore.
5. Just repeat the process of putting down the boards. Always see to it that the tongue and groove ends are fitted together. In attaching the flooring, use the pneumatic stapler.
Hardwood floors require some maintenance and actually do add beauty to your home. With its natural beauty, it can give any home a classical or traditional look. If you want this kind of ambiance in your homes, then consider hardwood floors in your houses as the best solution.
Like, unfinished hardwood floors, mohawk is one of the respected brands in flooring. It ranges from Mohawk carpets to rugs and now it introduces its new innovative creation called Mohawk Laminated Flooring. These new flooring features InstaClic which is glueless installation based upon preparatory technology. Here are some
reasons why you should have Mohawk Laminated Flooring in your home:
* With the glueless laminated flooring you can just slide and fit together the boards. This provides you fast-fitting and you can never get too tight in a spot
* May it be classic or contemporary, you will surely find a style, color and texture that will fit you. Wooden floors offers you a wide range of designs from real wood to stones or even tiles. You name it and Mohawk laminated flooring has it.
mohawk floors
* Similar to linoleum floors, Mohawk will adapt in every room. Just simply follow the right way of installation and you’ll surely get the best results.
* When it comes to resistance, Mohawk is ready to face and wipe off high heels, cigarette ashes and even kiddy calamities and avoid water damage. It is also built with strong resistance from scuffs and scratches.
* Maintaining and keeping your Mohawk floorings is easy. A damp mop is all you need but there are also cleaners which can be purchased in supermarkets. Make sure that these cleaners you bought are recommended by your supplier. When it comes to stains a nail polish
remover will do its magic.
* Mohawk flooring is not sunlight sensitive which means you don’t have to worry about color fading due to sunlight.
* Mohawk flooring comes with padding which makes the floor more comfortable like in the kitchen and this will make your feet much comfortable and relaxed. It has also underlayment which diminishes the irritating hollow sound laminated floors produce.
Things to remember in keeping you laminate floorings:
– Keep your floor from dogs and cats or other animals that will damage your floors. Although Mohawk floors are durable but they can be scratched with untrimmed pet claws.
– Never drag furniture with laminate flooring instead place underlayment below the heavy object to be drag in order to protect your floors.
– It is also advised to use walk off mats in your doorways and felt pads under your all furniture legs.
– There are colored burn-in, filler sticks available for deep scratches, gouges and chips. These are used with special electric knives in order to repair these areas.
– If the damaged plank is severe you can do replacements without destroying the whole floor. Special tools, router bits and wood spines are used for plank replacements that make work easier.
So if you are looking for floorings that will fit your personality and style, this floor is for you!
Hardwood flooring is in the class through itself; not just a selection in flooring, but more similar to a custom. Hardwood floors make available the tribute of tradition.
Unfinished hardwood floor refers to flooring that needs sanding and finishing on place once setting up is done. This kind of unfinished hardwood floor is normally ¾ inches in thickness, tongue and ridged through end matching and on hand width ranges from 2 ¼ inches to 5 inches wide. Flat timber flooring is wider than 5 inches is on hand, but usually on a special order basis. Some times, hardwood floors are damaged by water.
Unfinished hardwood floor is usually a square edged item for consumption through a few exemptions. Board lengths on manmade flooring will range from 12 inches up to 78 inches on a random length basis. Elongated length flooring is on hand on a special order basis. This kind of flooring ought to be nailed or stapled over accepted plywood sub floor and should be fixed on or exceeding grade. There are 3 grades; the first grade of flooring is the clear part that refers to the most spotless grade of flooring, surrounding the smallest amount of color difference and no knots. Board lengths can differ from 12 inches to 78 inches but in general it has a longer standard length, normally approximately 3 inches long. It provides a cleaner, contemporary appearance for your interior. Additionally, fewer boards make installations fast and simple. You may use vacuum cleaners for hardwood floors.
The second grade of flooring is the select and better part that refers to flooring that has further color difference and can include some small pin knots. It as well permits for some sticker soil. Board lengths can differ from 12 inches to 78 inches but in general having a medium standard length of 2.5 inches long. Shady and dramatic flooring makes a statement in any living space. The last grade of flooring can be referred to as the first grade of flooring or the second grade of flooring ordinary and in general describing flooring through a total range of color which consists of mineral streaks, sticker stain, and solid knots of differing size. Board lengths can differ from 12 inches to 78 inches but having a shorter standard length, normally in the region of 2 inches in length.
Wooden floor is an ordinary thing that is the staple of the hardwood floor production ever since the turn of the last century. The red and white oak or palisander rosa being is the most ordinary domestic specie with the 3 grades of flooring and a variety of each cut. Whether its strip is1 ½ inches or 2 ¼ inches x ¾ inches in thickness through random lengths or hardwood floor includes the fresher engineered are the most frequently used for each and every job finishing, staining, and the custom wood floor systems.
