Dealing with unfinished hardwood floors

Hardwood flooring is in the class through itself; not just a selection in flooring, but more similar to a custom. Hardwood floors make available the tribute of tradition.
Unfinished hardwood floor refers to flooring that needs sanding and finishing on place once setting up is done. This kind of unfinished hardwood floor is normally ¾ inches in thickness, tongue and ridged through end matching and on hand width ranges from 2 ¼ inches to 5 inches wide. Flat timber flooring is wider than 5 inches is on hand, but usually on a special order basis. Some times, hardwood floors are damaged by water.

hardwood floors

Unfinished hardwood floor is usually a square edged item for consumption through a few exemptions. Board lengths on manmade flooring will range from 12 inches up to 78 inches on a random length basis. Elongated length flooring is on hand on a special order basis. This kind of flooring ought to be nailed or stapled over accepted plywood sub floor and should be fixed on or exceeding grade. There are 3 grades; the first grade of flooring is the clear part that refers to the most spotless grade of flooring, surrounding the smallest amount of color difference and no knots. Board lengths can differ from 12 inches to 78 inches but in general it has a longer standard length, normally approximately 3 inches long. It provides a cleaner, contemporary appearance for your interior. Additionally, fewer boards make installations fast and simple. You may use vacuum cleaners for hardwood floors.

The second grade of flooring is the select and better part that refers to flooring that has further color difference and can include some small pin knots. It as well permits for some sticker soil. Board lengths can differ from 12 inches to 78 inches but in general having a medium standard length of 2.5 inches long. Shady and dramatic flooring makes a statement in any living space. The last grade of flooring can be referred to as the first grade of flooring or the second grade of flooring ordinary and in general describing flooring through a total range of color which consists of mineral streaks, sticker stain, and solid knots of differing size. Board lengths can differ from 12 inches to 78 inches but having a shorter standard length, normally in the region of 2 inches in length.

Wooden floor is an ordinary thing that is the staple of the hardwood floor production ever since the turn of the last century. The red and white oak or palisander rosa being is the most ordinary domestic specie with the 3 grades of flooring and a variety of each cut. Whether its strip is1 ½ inches or 2 ¼ inches x ¾ inches in thickness through random lengths or hardwood floor includes the fresher engineered are the most frequently used for each and every job finishing, staining, and the custom wood floor systems.

Read More
Floors, Wood

Solutions 101: Hardwood floor water damage

No matter how careful and how hard you try to keep your hardwood floor clean and dry all the time, exposing it to water and moisture is just inevitable. High levels of moisture and water spills can cause significant damage to hardwood floor if not properly dealt with. Here are some ideas and tips on how you can restore and fix hardwood floor water damage.

When wood is exposed to heat, water and humidity, the wood expands due to the increase in its moisture content. The wood becomes wider which often results to cupping or buckling. But keep in mind, there is no problem that can’t be solved. A lot of various techniques can be applied to repair warm hardwood floor water damage. The most basic step is to effectively dry and restore the hardwood flooring. Immediate action is important so as to avoid prolonged exposure of the wood to moisture. Different drying methods can be done depending on the size of the wet and damaged area. Small water spills can be dried using soft towels. Air drying and using dehumidifier are solutions too. Increase air circulation by opening windows and doors or by using fans while a dehumidifier can be used to remove moisture from the air resulting to faster drying out. Never use heaters for drying the wet area for it may cause permanent damage on the wood.

Linoleum flooring

If the hardwood or linoluem floor has cupped already due to the moisture imbalance on the bottom side of the wood planks, the only way to bring it back to normal is to balance the humidity in the area. After the top and bottom side of the floor has stabilized, a professional can sand and flatten the hardwood floor to re-finish it. You can also do it on your own provided that you have the know-how. This goes the same for buckled hardwood floor where boards are already lifted up from the subfloor in which they are attached to. A hardwood floor installer can help you in reattaching the wood planks to the subfloor. Another hardwood floor water damage which is very common is the occurrence of mold and mildew stains. Badly infected floor boards have to be replaced already. If it can still be helped, scrub the floor using mild alkali like washing soda and mix four to six tablespoons of it with a gallon of water. After scrubbing, rinse it with clear water and let the floor dry thoroughly.

Now, if the mold has already grown under the paint of the hardwood floor, remove the finish and then scrub the wood using an abrasive cleaner. After that, use a solution of trisodium phosphate, a cup of chlorine bleach in a gallon of water. The wood needs to be sanded after all spots have been removed. Rinse it with clear water, allow it to dry and apply a wood preservative. Do all these before repainting the hardwood floor. For unpainted wood surfaces, warm soapy water can be used then dry it using an absorbent cloth afterwards. Once you have seen any minor problem on the floor, it is important that you find a way to fix it right away so it won’t lead to bigger hardwood floor water damage.

Read More
Floors, Refinishing, Wood

Restore the glam of old wooden floors with DIY floor refinishing

Among all the flooring materials we commonly use, hardwood is the most practical material to use. Beautiful floors made from real hardwood can be considered both an asset and an investment to any home owner. After a period of time, these floors that used to be beautiful are now damaged and covered with dirt or scratches. If you see your floors starting to get worn out, then consider doing a refinishing as your best choice. Although this can be a bit tough and tiring, just bear in mind that after all the work, a new floor is awaiting to be revealed. For those do-it-yourselfers, refinishing a hardwood floor can be a very challenging job. So if you want to learn how to refinish wood floors, then you better arm yourself with patience.

Floor refinishing

Refinishing your old linoleum floor is a very great way to increase the value of any area of the home. A dull surface or a floor full of scratches only needs a top coat of finish, and then your floor is now as beautiful as it once was. Many has considered refinishing a very difficult job, but then most of the important materials needed are just available around the corner and the steps on How to Refinish Wood Floors are just very easy to follow.

If you are scheduling to do the refinishing of the floors in your residence or basement, then better get these things in hand:
> Heavy and light sandpaper.
> Gloves.
> Wide brooms.
> Rollers with long handle.
> Floor wax or polyurethane finish.
> Brushes.
> Dust masks.
> Wood stain.
> Rags.
> Floor sanders and edger.
> Shop vacuums.

Wooden floor refinishing

After preparing the necessary materials needed, you are now on your way to start remaking your old floors. Here are the fundamental steps and ideas on refinishing wooden floors:
1. Remove anything from the room, including all the rugs and furniture where you are going to do the refinishing of the floors.
2. Make sure that all the nails in the wooden floor are countersunk to avoid any accident or injury.
3. Using mineral spirits or wax removers, clean the floor to remove the dirt and ventilate after.
4. When sanding, use a course to medium sandpaper to avoid clogging of the wood due to heavy dust.
5. Upon noticing the appearance of the new wood, start using fine sandpaper.
6. Lastly, clean the floor thoroughly again before applying finishes like oil based seals.

A potential home buyer usually looks at the appearance and quality of the flooring of a house they want. After years of usage, you’re what used to be a beautiful hardwood floor can become ugly and dirty because of scratches and damages and due to old age. But then you don’t have to worry anymore because if you know How to Refinish Wood Floors, then with just a little grease and sweat, you can transform the old damaged floor into a new floor in just a few simple steps.

Read More