How to clean a whirlpool bathtub

Whirlpool bathtubs are great for relaxing your frayed nerves and muscles, but if you know what kind of bacteria lurks in your jetted tub, you would have a hard time relaxing. Because it is hard to drain all of the water in the jets and pipes, your tub can be a prime environment for the growth of bacteria and fungi. Be wary of using whirlpools outside of your home and sanitize your home whirlpool on a regular basis.

Whirlpool bathtub

Knowing how to clean a whirlpool bathtub can extend the useful life of your jets. It insures that residue that is caught within the jets is not circulated within the whirlpool bathtub. It is advisable to conduct thorough cleaning at least once a month, with a superficial cleaning occurring. Anyone may think that cleaning a whirlpool bathtub is no different than cleaning a regular bathtub but this thought is completely wrong. If Whirlpool bathtubs are not cleaned properly they will not last as long and will not perform at their best. Cleaning a whirlpool bathtub is not hard, though it contains jets. However, cleaning does require a little extra attention once per month.

1. Clean your whirlpool bathtub at least once a week as you would your normal bathtub with store-bought bathroom cleaners. This may keep your bathtub clean until you get to the big cleaning.
2. Fill your bathtub up with water that reaches at least 140 degrees F. Use a food thermometer in order to make sure the temperature is high enough.
3. Pour at least 1 cup of bleach and 1/8 cup of dish soap into the hot water.
4. Turn whirlpool tub’s jets on after the tub has been filled all the way. Let is sit for at least 15 minutes and then drain the tub.
5. Fill the bathtub again but with cold water. Turn your jets on again for another 15 minutes. This process will rinse out any of the leftover cleaner.
6. Drain again your tub and then clean as you normally would with your favorite store-bought bathroom cleaner.

Classic two people whirlpool bathtub

In order to maintain the functionality of your tub jets, study the steps on how to clean a whirlpool bathtub many manufacturers recommend using bath salts and bath bubble baths that are not oil based. Using these bath oils should also be strictly avoided because the whirlpool tub can increase the foam of these oils, also increasing the chance that it will cling to the plumbing. In addition, using nonabrasive bathtub cleanser is possible. Apply this cleanser according to the manufacturer’s directions once a week to remove surface grime. A low foam detergent like dishwasher detergent can also be used for deep cleaning. This detergent is less expensive than commercial cleanser and you may already have some in your house.

  • Teak Sofa

    Now that is going to help all of those people who were really worried about how to clean that bathtub especially in condos and vacational propeties

  • Danny Hanner

    This is great advice. I just installed my new Whirlpool Tub and I was wondering what the best way to clean it. This was very informative and pertinent to my issue.

  • The most effective way to clean out the jetted tub pipes and jets is to use a bio cleaner, that eats away at the gunk on the walls, creating a lot more flakes than you have ever seen and overtime, a few days or less, you will no longer have any flaking or gunk coming out of the jets. Bio cleaners are green, and the one I use only requires 1 teaspoon per weekly cleaning. Yes you do have to maintain the jetted tub just like you do a toilet, they get dirty quick. There is a ton of information on a website “The Sand and the Foam” I would check it out, they also have a $1 trial so what do you have to lose. There is another website “cleaning jetted tubs” that talks about what bleach and detergents do in your jetted tub as well. Hope this helps your quest for a clean whirlpool tub.